The railway clips are of type Ⅰ, Ⅱ and Ⅲ. Rail clips I type is composed of ω rail clips, rail screw spikes, gauge baffles and rail rubber pads. Its buckle pressure is insufficient, and the projectile range is too small. The shape of rail clips Ⅱ is the same as rail clips Ⅰ, and the projectile range is not less than 10mm. The buckle force is higher than rail clips I type. Elastic rail clips type III is a shoulderless fastening system, which is suitable for heavy transportation and high-density transportation conditions. It has the advantages of high pressure and good elasticity of the fastening system. In particular, the concrete retaining shoulder is eliminated, and the lateral force at the bottom of the rail is eliminated The possibility of lateral displacement under action.
I hope you can use this information to deepen your understanding of the rail clip fastening system, use the rail clip fastening system reasonably, and quickly and accurately select a suitable and practical rail clip fastening system according to your needs. Of course, as a professional manufacturer of rail fasteners, Kingrail Parts not only provides rail clip fastening system, but also other types of rail fasteners. Therefore, new and old users are welcome to contact Kingrail Parts. Our company has the ability and strength to meet your needs.