Crawling of railway lines often causes uneven track seams and skewed sleepers, which is very destructive to railway lines, and even causes small track runways, which endangers driving safety. Therefore, effective measures must be taken to prevent crawling. Rail anchors and anti-climbing braces are usually used to prevent crawling of railway lines. The through-pin rail anchor is composed of through-pins of rail clips with baffles. During installation, one side of the rail clamp clamps the rail bottom, and the other side wedges into the through pin, so that the entire railway anchor is firmly clamped to the rail bottom. In this way, when the steel rail is subjected to longitudinal resistance, because the baffle of the rail clamp is close to the sleeper, the sleeper and railway spikes prevent the steel rail from crawling. In order to give full play to the role of the railway anchor, anti-climbing braces are usually installed between the sleepers to connect 3 to 5 sleepers to jointly resist the rail crawling.
This is the role that the rail anchor plays in the railway. At the same time, only when the quality of the anti-railway anchor is qualified and installed correctly, can the role of the rail anchor be fully utilized to ensure the normal operation of the railway. If you are interested in rail anchor through the introduction of the above information, if you want to know more information about rail anchor, or want to buy rail anchor, you can contact our company. Kingrail Parts has the ability and strength to meet your needs and provide you with satisfactory services.
Inquiry Now