Soluble emulsifiers usually consist of emulsifiers, soil, solvents, builders, corrosion inhibitors and a small amount of water. The function of water is to dissolve the emulsifier. This cleaning agent dissolves the dirt on the surface of the fastener while also leaving a layer of anti-rust film on the surface of the fastener. Emulsified cleaning agent is a concentrated pure oil product, which becomes a white milky liquid after being diluted in water. Among them, the emulsifier and detergent can hold the grease particles and dissolve them into the cleaning agent containing solvent and oil.
2. Alkaline cleaning agent
Alkaline cleaning agent is a mixture of builders and alkaline earth metal salts of surfactants. It is a widely used cleaning agent. The pH value of the cleaning agent is required to be around 7. The cleaning ingredients of this type of cleaning agent are hydroxide, silicate, carbonate, phosphate, borate and organic chelate. Each of the above salts and surfactants is mainly to ensure the cleaning effect, followed by economy.
Decontamination cleaning agents mainly contain solvents, surfactants and water. The solution is not an emulsion, but a pure solution. This cleaning agent is used in the maintenance cleaning of equipment and standard parts.
I hope that the above introduction can help everyone. We have learned about the relevant knowledge of railway fasteners cleaning agent, which will help us to clean the railway fasteners in the future. Kingrail Parts is engaged in the production and sales of railway fastemers. If you want to know more about railway construction and maintenance, please pay more attention to our website: www.kirail.com