Rail clamp is small in size, light in weight, large in force, economical and beautiful. When installing rail clamp, the rail track needs to be straightened according to the design requirements. Positioning of the base plate. Arrange the bases along the crane track at a distance of 500mm, and locate the bolt center in the vertical direction from the track center value a (table). Or the front edge of the base plate is positioned 1m/m from the bottom edge of the track. Weld the base plate. Fillet welding with 6mm on both sides. Assemble the fasteners in the following order: bolts in place-upper cover-flat washers-spring washers-nuts-tighten.
Due to time constraints, the introduction to rail clamp is here. I hope you can learn more about rail clamp through this information. Of course, if you still have doubts about rail clamp, want to know more information about rail clamp, or want to purchase and apply rail clamp, you can directly contact Kingrail Parts. Of course, in addition to providing rail clamps, our company also produces and provides other types of railway accessories, industrial and mining accessories, etc. Welcome new and old users to consult and purchase.
Inquiry Now