1. After the railway switch is laid, the rammed earth bed should be reinforced within one week. In particular, it is necessary to strengthen the tamping of the turnout part and the fork part to stabilize the state of the turnout as soon as possible.
2. The surface of the sliding table, the rotating mechanism, and the surface of the moving workpiece should be regularly coated with lubricating oil.
3. In order to prevent the side abrasion of the core rail, the spacing of the guardrails should be checked and adjusted regularly.
4. When the railway track flashes, it should be polished in time.
5. Transform the foreign matter between the equipment sleepers, so that the transformation mechanism can operate flexibly.
6. The surface of rail screw spikes should be coated with anti-corrosion grease.
7. Regularly check and tighten all strong bolts.
8. Regularly check whether the elastic rail clips are damaged or severely deformed, and replace them in time.
9. Regularly inspect and maintain the insulating parts in the switch to ensure the normal operation of the signal system.
10. Check the meter regularly. If you find that the gauge is out of tolerance, you can adjust the gauge by adjusting the size surface of the gauge block.
In fact, in order to ensure the overall quality of railway turnouts, in addition to daily maintenance work, it is also necessary to pay attention to many details during the construction process, such as checking whether the Q value of the railway turnout sleeper installed by the motor changes; Type III: Specific pillows in accordance with the provisions of this law; For railway turnout directions, carefully adjust the smoothness, otherwise it will be impossible to control the sharp steel rails, the basic rails are closed, and maintenance is very unfavorable after maintenance; when switching, railway turnouts are concentrated Tamp down and check whether the guide rail is placed on the sliding bed.
Kingrail Parts provides various railway turnout parts, of course we also provide integral railway turnouts. Welcome to the turnout construction and maintenance company to visit our China Railway Fastener Factory.