Kingrail Parts is a professional rail clamp manufacturer, providing you with a wide range of rail clamps, which are widely used in railway construction all over the world with their first-class durability. We use high-quality steel to manufacture and design railway clamps that meet industry parameters and market requirements.
Rail Clamp Definition:
The rail clamp is an important part of the railway fastener system. It has a similar function to the rail clamp, but it is used for different types of railway fasteners.
Rail clamps are used between the sleeper plate and the rail bolts to fix the rail and maintain its lateral position, while allowing the equipment to perform the necessary longitudinal movement.
Rail Clamp Features:
1. Scientific design, high quality
2. Best performance and low maintenance
3. High efficiency
4. High tensile strength and long service life
5. Provide various fixture types and custom designs.
Rail Clamp Raw Matrials:
There are three main materials for rail clamps: forged Q235, cast steel ZG35 and QT500-7 cast iron
|Rail Clamp's Material
|Q235-forging rail clamp
|ZG35-cast steel rail clamp
|QT500-7-cast iron rail clamp
|C:0.12-0.20, Mn:0.30-0.70, Si:≤0.3, P:≤0.045, S:≤0.045
|C: ≤0.4, Mn:≤0.9, Si: ≤0.5, P:≤0.04, S:≤0.04
|C:3.60-3.80, Mn:≤0.6, Si:2.50-2.90, P:≤0.08, S:≤0.025
The steel rail clamps produced by Kingrail Parts have a protection level of over 9 and can be used in acid rain areas. Before each shipment to the customer, all rail clamps need to pass the sulfur dioxide test for 120 hours.
Types of Rail Clamps:
Kingrail Parts can provide various rail clamps or railway clamps to meet customer needs, suitable for different rail conditions, whether it is subway, trunk or crane rail.
1. Crane clamp 21/050 AN/BN
Crane clamps enable the rails to be installed with good tolerances, and they can be adjusted to ensure precise alignment of the rails. Our crane clamps are designed to carry heavy loads transferred by cranes onto the rails. For the installation method, it can be bolted or welded, depending on the needs of the user.
2. Crane rail clamp 22/130 AN/BN
The self-locking Gantrail rail clamp is a special design for fixing and fixing the rail with a rubber nose. By adjusting the height of the rubber nose, this clamp can be used for different rail types.
3. KPO rail clamp
KPO rail clamp is a high-strength bolt connection clamp. KPO3, KPO6, KPO9 are more commonly used in rail fastener systems by combining ribbed tie plates, rail bolts and washers.
4. North Africa Rail Clamp
This kind of rail clamp is usually used on railway lines or cranes in North Africa.
5. K-type rail clamp
6. MTH Clamp
7. Other clamp are based on customer requirements or drawings.