Spread the railway anchors and supports near the installation or replacement location. Open the railroad anchor and the track bed at the position of the supporting wood. If the sleeper installed with the support is skewed, it needs to be corrected in time. After installing the bearing wooden pad, hang the railway anchor on the bottom of the rail against the supporting wooden pad, and install the threaded pin. Use a hammer to lightly hit the railway anchor and pin until it is tight. This is the installation method of the railway anchor, the whole process is not complicated.
However, the installation problem of the railway anchor cannot be ignored. If it is installed improperly, many safety hazards will be buried. Therefore, I hope that users can install anti-railway anchors in strict accordance with the correct process. This is not only to ensure safety, but also to further play the role of the railway anchor. If you want to buy a high-quality railway anchor after knowing the installation method of the railway anchor, please contact Kingrail Parts. The railway anchor provided by our company is qualified in quality and reasonable in price, and can be purchased and applied with confidence.