Grooved rubber pads are elastic polyurethane pads placed between the rail and sleeper to protect the top of the sleeper from wear and impact.
The combination of groove design and selected rubber gives these pads unique high resilience, robustness and weathering resistance. Rail pads can effectively extend the service life of rails and rail fasteners.
Grooved Rubber Pads Specifications:
Shape: Rectangular, Square
Hardness:75~85 shores A
Features of Rubber Pads:
1. High performance
2. Non-defective nature
3. Low maintenance cost
5. Precision design
7. Seamless quality
8. Non-defective nature
Our rubber pads are widely used in bridges, turnouts, railway expansion joints and running railways.
Types of Grooved Rubber Pads:
1. Rail pad for E-type rail fastening system
The rail rubber pad used in the E-rail fastening system has a similar function to the rail insulator, which can isolate the rail above it from the sleeper below it, effectively preventing vibration and structural noise. Rail pads, e-clips, rail insulators/insulating gauge blocks, and rail shoulders/inserts form a complete set of E-type rail fastening systems.
2. Rail pad for SKL rail fastening system
The rail pad in the SKL rail fastening system is a small but important fastening component that works with SKL clips, screws, plastic dowels, tie plates, etc.
3. Rubber pads for concrete sleepers
|Application:||43kg/m ,50kg/m, 60kg/m, 75kg/m rail|
|Models:||43-7-7, 43-10-7, 50-7-9, 50-10-9, 60-10-17, 60-12-17|
|Operation temperature:||-50~70 degrees|
|Notes:||Should be stored in a clean and ventilated place. Don't put it under direct sunlight, keep away from heat and chemical reagents. Do not touch oil, organic solvents and other chemicals.|
4. High elastic groove EVA/HDPE/rubber rail pad
Our EVA/HDPE/rubber rail pads are highly elastic, suitable for UIC54, UIC60, BS80lbs, BS100lbs and other rail types and order sizes. According to customer requirements, rail pads with or without grooves can be customized, with various possible designs.