Rubber pads for railway tracks, also known as rail rubber pads, railway rubber pads. It is an important part of the railway structural system. Railway rubber pads are installed between steel rails and sleepers. The function of Rail Pads is to protect the sleepers from impact and extrusion. At the same time, railway rubber pads can electrically isolate the signal system.
As railway rubber pads are always exposed to the atmosphere, they are required to have good resistance to natural aging, cold resistance, and heat resistance. In addition, railroad rubber pads should have good shock absorption and low noise performance.
Rubber Pads for Railway Tracks Specifications:
Material: natural rubber, styrene butadiene rubber, HDPE, EVA, high-density polyethylene and polyethylene, etc.
Size: custom type
Standards: E-type, SKL, KPO, Nabla, PR, Russia, fast, UIC, BS, JIS, etc.
Features of Rubber Pads for Railway Tracks:
1. The rail rubber pad has the characteristics of high elasticity, no deformation or breakage in a large temperature range.
2. Long service life, low maintenance and replacement cost.
3. Kingrail Parts can produce rubber sleeper pads of various specifications and different materials. Rubber sleeper pads are suitable for wooden sleepers, concrete sleepers and steel sleepers.
Types of Rubber Pads for Railway Tracks:
1. Rail pad for E-type rail fastening system
The rail rubber pad used in the E-rail fastening system has a similar function to the rail insulator, which can isolate the rail above it from the sleeper below it, effectively preventing vibration and structural noise. Rail pads, e-clips, rail insulators/insulating gauge blocks, and rail shoulders/inserts form a complete set of E-type rail fastening systems.
2. Rail pad for SKL rail fastening system
The rail pad in the SKL rail fastening system is a small but important fastening component that works with SKL rail clips, screw spikes, plastic dowels, tie plates, etc. The elastic rail pads we produce have a certain rigidity and significantly increase the elasticity of the rail superstructure. It has higher elasticity and helps rolling stock to run quietly to meet the acoustic requirements of today's railway lines.
3. Rubber pads for concrete sleepers
Application: 43kg/m, 50kg/m, 60kg/m, 75kg/m rail
Models: 43-7-7, 43-10-7, 50-7-9, 50-10-9, 60-10-17, 60-12-17
Operating temperature: -50~70 degrees
Notes: Store in a clean, ventilated place. Don't put it under direct sunlight, keep away from heat and chemical reagents. Do not touch oil, organic solvents and other chemicals.
4. High elastic groove EVA/HDPE/rubber rail pad
Our EVA/HDPE/rubber rail pads have high elasticity and are suitable for UIC54, UIC60, BS80lbs, BS100lbs and other rail types and order sizes. According to customer requirements, rubber rail pads with or without grooves can be customized, with various possible designs.