Railway track clamps are an important part of the railway fastening system. It has a similar function to the rail clip, but is used for different types of railway fasteners.
Rail clamps are used between the sleeper plate and the rail bolts to fix the rail and maintain its lateral position, while allowing the equipment to perform the necessary longitudinal movement.
Advantages of Railway Track Clamps:
1. Reduce rail stress through wider contact points
2. Positive pre-torque angle to eliminate bolt bending
3. Quick installation
4. Rugged and durable products are designed for long service life
Railway Track Clamps Types:
According to customer requirements, we can provide different types of rail clamps. Among these clamps, according to our previous production experience, forged Q235, cast steel ZG35 and QT500-7 cast iron are the top three choices.
Name | Rail Clamps | ||
Material | Q235-forging | ZG35-cast steel | QT500-7-cast iron |
Chemical composition(%) | C:0.12-0.20, Mn:0.30-0.70, Si:≤0.3, P:≤0.045, S:≤0.045 | C: ≤0.4, Mn:≤0.9, Si: ≤0.5, P:≤0.04, S:≤0.04 | C:3.60-3.80, Mn:≤0.6, Si:2.50-2.90, P:≤0.08, S:≤0.025 |
1. Crane clamp 21/050 AN/BN
Crane clamps can make the installed rails have good tolerances. To ensure accurate alignment of the rails, they must be adjusted. Our crane rail clamps are designed to carry heavy loads. According to the needs of the end user, the crane clamp can be bolted or welded to install.
2. Crane clamp 22/130 AN/BN
This type is a special design that uses rubber noses to fix and fix the rails. By adjusting the height of the rubber nose, this clip can be used for different rail types.
3. KPO rail clamp
KPO3, KPO6, and KPO9 are high-strength bolt fixing clips that are used in combination with ribbed tie plates, rail bolts and washers, and are more widely used in rail fastening systems.
4. North Africa Railway clamp
5. K type rail clamp
6.MTH rail clamps
7. Other customized clamps are available according to customer requirements or drawings
Inquiry Now