Crane rail splice bar, also known as railway fish plate or rail joint bar, is a metal bar that is bolted to the ends of two rails to connect them together to form a crane rail.
As a professional crane rail splice bar manufacturer and supplier, Kingrail Parts has in-house rolling, forging, machining, and stamping equipment to manufacture any type of fishplate to suit all rail sections, such as UIC 60, UIC 54, BS 80A , BS 90A, 115 RE, 136 RE, TJ 45, TJ 37, 50 kg, 60 kg, etc.
Crane Rail Splice Bar Installation:
1. Before installation, cut off the power supply of the electrical appliance and circuit under test, and temporarily discharge the relevant components.
2. Prepare the washer, remember to use the guide washer when installing the guide rail joint.
3. First install each bolt on the connecting section, one rail joint, and two connecting sections. Then install other fishtail bolts on the fishplate and rail joints.
4. Oil the contact area between the rail joint and the rail, and also oil the fish-tail bolt.
When using rail fishplates, you need to pay more attention to it. The safety of the railway is the most important. It is necessary to select suitable and matching rail joints according to the actual conditions of the railway track.
We are a professional fishplate manufacturer with very rich production experience. If you have any questions about rail joints, please contact us and we will reply as soon as possible.