Before installing the rail-insulated gauge tie rod, it is also necessary to do the preliminary preparations, such as reviewing the design drawings to ensure that the polarity crossing is correct. Investigate the rail insulation installation location according to the double-track circuit diagram and make a mark. Adjust the position of the rail seam to see if the size meets the requirements, otherwise, please adjust the work department to meet the requirements. Investigate the rail type and determine the rail insulation specifications.
When installing the insulated rail gauge rod, first separate the assembled insulation and place the accessories in a convenient position. Quickly remove the work splint, install the rail end insulation into the rail seam and straighten it, then install the groove type insulation and the rail fishplate, adjust the eyeholes, and correctly pass in the bolts with gaskets, insulation pads, and insulation tubes on one side. , And then assemble the accessories and screw the nuts. Adjust the groove insulation, fish plate, and rail end insulation to meet the requirements, and then fully tighten the nuts.
Kingrail is a professional manufacturer of insulated rail gauge rods. If you have any questions about the installation of insulated rail gauge rods. You can consult us. Or follow our official website www.kirail.com for updates.