Cranes rail clip: also known as welding crane rail clip, welding rail fixing device, steel beam railing device, welded type pressure plate, no matter what is called, it is nothing more than pressing the fixed rail. Usually welded on the beam of the work, sometimes welded on the I-beams embedded in concrete.
Kingrail Parts can produce various welded crane rail clips according to EN, Arema, UIC, BS, JIS and other standards.
Type and material of the crane rail clip
The crane rail clip can be divided into WJK, SWJK, HWJK series TG38, TG43, TG50, TG60, QU70, QU80, QU100, QU120.
Crane Rail Clip is also divided into two types: Welded Type and Bolted Type. Welded rail clip consists of 5 parts: Nut, Hardened washer, Clip cap with integral rubber block, M2O Captive Bolt, Weldable Base. The bolted -type rail clip consists of 2: a special washer, a clip with an overall rubber block.
Bolt type: 3224/3112/ 3116/3120/ 3124
Welding type: 9124/9116/9120/9220/1116/1216
Rail pad: mk2/ mk7
Applicable rail type: A65/ A100/ A120/ JIS37/ JIS50/ JIS60/ QU80/ QU70/ QU120/ UIC54/ UIC60, etc.
Material of rail clamping:
There are two types of rail clip materials:
Semi -cast steel: The upper cover is the ductile cast iron, and the base is cast steel.
Full cast steel: The upper cover and the base are cast steel.
Standard of Rail Clip
Rail TG24 TG24 TG38 TG43 TG50 QU70 QU80 QU100 QU120 welded track rail is mainly used for the fixing of factory steel beam track. Fixed part of material and standard:
1. The upper cover plate, base plate and adjustment board are ZG270-500. The material complies with the regulations of 5676-85. Lost wax for precision casting. Level II, the dimensional deviation meets the JZ67-2ii accuracy requirements.
2. The bolts and nuts are Q235BF steel parts, mechanical performance and chemical composition GB700-88. The surface accuracy of the bolt is 12.5. The nuts meet the requirements of GB 6170-86.
3. The flat washer is Q235AF steel. The production requirements are implemented in GB97.1-85.
4. The spring washer is 65mn or 60SI2MN steel. The material meets the requirements of 1222-84. The production requirements are in accordance with the regulations of GB93-87.
Other crane rail fasteners:
1. Gantrex and Gantrail clip fixing system
2. Gantrex and Gantrail elastic pads and steel reinforced resilient pad
3. Continuous steel tie plate and non -continuous steel tie plate
4. The crane rails under different standards
5. Various standards and non -standard rail accessories
6. Aluminum heat welding
7. Provide rail design and installation technical services
We can customize welded crane rail clips according to customers' specifications and requirements
Contact us
Please contact us for more information and quotations.
Inquiry Now